Although glass processing plants all use glass gaskets, they may not truly understand this small gasket. Below, we will share some practical knowledge about glass cork gaskets and EVA gaskets!
1. During long-distance transportation, try to stick as many foam cork pads or foam EVA pads on the glass as possible, which can better cushion the collision caused by bumps during transportation. Foam can adsorb the surface of the glass, so there is no need to worry about the problem of adhesive type gaskets leaving adhesive marks.
2. Glass cork mats are pressed products, and the problem of chip shedding is more or less common. However, the worse the quality of cork mats, the more severe the chip shedding.
3. The cost of glass cork mats is slightly higher in terms of material and processing compared to EVA mats, so the average price of EVA mats per box will be cheaper than that of cork mats, or the number of mats will be higher than that of cork mats under the same quantity.
4. The heavier the weight of the glass gasket, the higher the density, strength, and protection.